Submit a request
Follow

How to Change Rotation Speed of Artec Turntable

Artec3DTurntablePhoto-Web.jpg

Artec Turntable is a great way to complement your workflow with Artec Space Spider. You can use these instructions to change the rotation speed during scanning. Please make sure Artec Studio is not running before beginning this process.

  1. Open a new File Explorer window and navigate to

    C:\Users\[User]\AppData\Roaming\Artec\Artec Studio 14 Professional

    or

    %AppData%

    Note: Please change C:\ to the drive where Artec Studio is installed and [User] to the user account where Artec Studio is installed

  2. Open studio.conf in a text editor such as Notepad, Sublime Text, or Atom
    AppData.png
  3. Press Ctrl+F to find the parameter TurntableSpeed
    TurntableSpeed.png
  4. Change the value to an integer between 1 (slowest) and 4 (fastest)
  5. Press Ctrl+S or go to File>Save to save the changes made to the studio.conf file

That's it! That's all there is to it! If you find the speed is still too fast or too slow, change the speed of rotation again and save the changes until you find a speed setting that is comfortable for you.

In case you experience any issues with your Artec 3D scanner or require technical assistance with your device or Artec Studio, in the first instance please contact your local Artec dealer/distributor directly. You can also contact the Artec Support Team by clicking on the the "Submit a request" button at the bottom right of the page, or by emailing support@artec3d.com.

 

Was this article helpful?
0 out of 0 found this helpful