Submit a request

The Artec battery: an optimal solution for Artec 3D scanners


  • Up to 6 hours of continuous scanning
  • Type of battery: Lithium-polymer
  • Output voltage: 12V
  • Capacity: 16000 mAh/59.2W

Note: for more information, feel free to download leaflet attached to the article.


Compatible scanners:

  • Eva / Eva Lite
  • Spider / Space Spider
  • L2
  • MHT (T2 series)
  • MH (W2 series)


How to use:

Please begin by fully charging your battery. To do so, plug the power adapter (charger) into the battery's INPUT socket and into a wall outlet. The charge status can be conveniently read from a row of LEDs on the battery itself.
Once fully charged, you may connect your battery's OUTPUT socket to your Artec3D scanner using the supplied battery cable. Please refer to the picture below:



Heavy usage of the Artec battery:

The most severe usage of the Artec battery that we are aware of took place in an expedition to Kenya. The 3D-scanning sessions in the Kenyan desert lasted several days. During the first day, our team 3D-scanned for at least 4 hours in total (bones and skulls of ancient crocodiles, elephants, and turtles). At the end of the day, the battery still wasn't depleted and even lasted through our second day of scanning.


We are here to help! If you have any questions or issues, please do not hesitate to contact our team by emailing or by clicking on "Ask Support" button on the upper part of the screen. We will always be happy to assist you and will get back to you as soon as we can.