- Up to 6 hours of continuous scanning
- Type of battery: Lithium-polymer
- Output voltage: 12V
- Capacity: 16000 mAh/59.2W
Note: for more information, feel free to download leaflet attached to the article.
- Eva / Eva Lite
- Spider / Space Spider
- MHT (T2 series)
- MH (W2 series)
How to use:
First of all, fully charge your battery using its INPUT socket. Then connect the battery OUTPUT socket to your Artec3D scanner, using the supplied battery cable, as it's shown on the picture below:
What were the most hardcore conditions, while 3D scanning with a battery?
The most severe testing of the battery took place in the expedition to Kenya. 3D-scanning sessions in desert lasted several days. During the first day, our team has been 3D-scanning for 4 hours in total (bones and skulls of ancient crocodiles, elephants and turtles). At the end of the day, there was still 60% of the battery left, after two days it still wasn’t used up :)
We are here to help! If you have any questions or issues, please do not hesitate to contact our team by emailing firstname.lastname@example.org or by clicking on "Ask Support" button on the upper part of the screen. We will always be happy to assist you and will get back to you as soon as we can.